Bike project 1: Donor bike part 2

 Before cutting the donor bike apart I took measurements to use as references during the design.  Here they are.  All measurements in inches.

Wheels	Front	Rear
Radius	13.00	13.00
Tire width	1.98	2.19
Tire height	1.71	1.73
Skewer length with nuts	5.75	7.19
Sekwer diameter	0.19	0.19
Hub
Flange diameter	1.86	2.13
Radius	0.93	1.06
Flange thickness	0.13	0.14
Non-flange diameter	1.09	1.30
Radius	0.55	0.65
Exterior length	2.82	2.24
Interior length	2.58	2.01
Axle length	4.25	5.71
Half	2.13	2.85
Length less engagements	1.83	2.55
Axle diameter	0.34	0.39
Radius	0.17	0.19
Axle engagement
Cluster side	0.15	0.21
Non-cluster side	0.15	0.19
Axle end to wheel enterline
Non cluster side	2.09	2.91
Cluster side	2.09	2.84
Average	2.09	2.88
Axle flange exterior to axle end
Non cluster side	0.67	1.53
Cluster side	0.67	1.98
Axle from outside non-cluster to cluster side	Exposed axle; lock nut; Dust sear;Bearing nut; assembly is symetric	Exposed axle; lock nut; dust seal; bearing nut; hub; dust seal; bearing nut; spacer; locknut; exposed axle
Spokes	18 per side	18 per side
Rim
Width	1.05	1.10
Height	0.65	0.67
Rear cluster
Largest diameter	na	5.45
Smallest diameter	na	2.26
Thickness	na	1.41
Number gears	na	7.00
Deapth	na	1.46
Front fork
Length on center line	14.56
Dropout lead from headset center line	2.00
Straight section length to center of fork tubes	0.77
Length on center line to dropout flange	14.00
Head tube diameter	`
Stearing tube height	2.25
Dropout height	1.50
Length from race nut to dropouts	17.00
Axle lead from head tube center line	2.13
Tube diameter	1.00
Width outside at tubes	5.11
Interior width between dropouts	3.93
Exter width between dropouts	4.45
Drop out deapth	0.63
Drop out width	0.39
Drop out thickness	0.21
Width outside at dropouts	4.42
Brake offset from drop out	10.00
Angle of head tube, degrees from verticle	19.00
Head tube
Bottom of tube exclusive of race to ground	27.63
Top of tube exclusive of race to ground	31.63
Diameter	1.51	0.75
Radius	0.75
Length between race nuts	4.28
Race nut height	0.43
Race nut diameter	1.83
Rear fork
Centerline from dropout center to bottom cross tube	14.13
Dropout
Interior width between	5.35
Exterior length between	5.76
Thickness	0.20
Width	0.40
Deapth	0.67
Offset from center line to cluster dropout center
Offset from center line to non cluaster dropout center	2.70
Length rear arm cluster side to center of dropout	14.44
Length rear arm non cluster side to center of dropout	14.00
Bulge for tire from cross tube
Start	1.50
End	2.50
Width in center of bulge	2.88
Break offset from dropout center	10.00
Crank
Width
Including nuts	2.89
Exclusive of nuts	2.67
Total width including arms	8.00
Housing diameter	1.60
Crank arm
Pedal center to crank center	6.81
Crank center to end of arm	7.50
Crank center to pedal end	8.75
Height from ground	11.63
Pedal
Length	4.00
Width	3.50
Height	1.15
Gears
Rear
1	34
2	24
3	22
4	20
5	18
6	16
7	14
Front
1	48
2	38
3	28